Description
These products are pressure sensitive tapes using a skived & tensilized Teflon™ film that is coated with “high temperature” silicone adhesive. The tensilized film provides higher tensile strength, lower elongation and higher dielectric strength than regular skived film. Those products designated with an “asterisk” are UL recognized components. (UL File no. E179854)
Application Information
These tapes are used primarily in electrical applications such as coil wraps and separators, transformer, slot liners and harness wrapping where good insulation and heat resistance are needed. They are also used in mechanical applications requiring high temperature resistance and good release properties such as aerospace composites.
Above are “Typical Values” not intended for specifications. DeWAL requests the opportunity to work with you on specifications.
[td1] Backing Material [/td1] [td2] Teflon™ Film[/td2]
[td1] Backing Thickness [/td1] [td2] 0.002 in (0.005 cm)[/td2]
[td1] Adhesive System [/td1] [td2] Silicone[/td2]
[td1] Adhesive Thickness [/td1] [td2] 0.0015 in (0.004 cm)[/td2]
[td1] Adhesion ASTM-D-1000 [/td1] [td2] 25 oz/in (279.03 g/cm)[/td2]
[td1] Tensile Strength ASTM-D 3759 / ASTM D 882 [/td1] [td2] 11000 psi/min (75.8424 mpa/min) [/td2]
[td1] Elongation ASTM-D 3759 / ASTM D 882 [/td1] [td2] 100%[/td2]
[td1] Dielectric Strength ASTM-D 149 [/td1] [td2] 4000 V/mil[/td2]
[td1] Max. Operating Temperatures [/td1] [td2] 500 ºF (260 ºC) [/td2]
[td1] U. L. Approval File no. E179854 [/td1] [td2]Approved – Flame Retardant/Cold Resistant [/td2]
[td1] Govt. Specification AA-59474-Type-1, Superseding 23594C Type 1 [/td1] [td2] Pass [/td2]
[td1] Core I.D.[/td1] [td2]3 in (7.62 cm) [/td2]
[td1]Roll Length [/td1] [td2] 36 yd (32.92 m) [/td2]
[td1] Width [/td1] [td2] .25 to 20 in (0.635 to 50.8 cm) [/td2][/table]
