Description
CONSTRUCTION
Substrate: Adhesive: Liner:
FEATURES
2-mil Aluminum foil Solvent Acrylic
60-lb Silicone Coated Kraft
- An aggressive all-weather acrylic adhesive system
- Bonds tightly and permanently to insulation facing and HVAC ducts
- Performs well over a wide range of environmental conditions
- Meets or exceeds all UL181A-P/181B-FX requirements
- UL Classified
TYPICAL PROPERTIES
|
Test |
Typical Values (english) |
Typical Values (metric) |
Test Method |
|
Foil Thickness |
0.002-in |
0.02-mm |
PSTC-133 |
|
Peel Adhesion to Stainless Steel |
>60-oz/in |
6.6-N/cm |
PSTC-101 |
|
Shear Adhesion |
Meets all requirements |
Meets all requirements |
UL-181A-B PSTC-131 |
|
Tensile Strength |
25-lbs/in |
44-N/cm |
PSTC-131 |
|
Minimum Service Temperature |
10F |
-12C |
HC Internal |
|
Service Temperature Range |
-25F to 300F |
-32C to 184C |
HC Internal |
APPLICATION
Application surface must be clean, dry and free of contaminants. Apply pressure with plastic squeegee.
SHELF LIFE & STORAGE
Under ideal storage conditions of 60F to 80F and low humidity, shelf life is one year from date of purchase.
STANDARD CONFIGURATIONS & PACKAGING (CUSTOM CONFIGURATIONS & PACKAGING AVAILABLE UPON REQUEST)
|
Roll Width |
Roll Length |
Rolls/Carton |
Cartons/Pallet |
|
2.5-in |
180-ft |
16 |
27 |
|
3-in |
180-ft |
16 |
27 |
Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use. Revision 4.23.2015 10:18.
