2 mil Skived PTFE Film Tape


PTFE skived film tape with a high temperature silicon adhesive. Used in electrical applications such as harness/coil wraps & separators, transformers, & slot liners where good insulation & heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearing, forming dies, aircraft mold release, & guide rails where high temperature, maximum slip, & lubricity are required. High elongation permits tight wrapping; conforms to sharp bends/irregular surfaces.

High density PTFE skived film tape, which provides higher tensile strength, lower elongation, & higher dielectric strength than regular skived film (primarily used for electrical applications listed above & for roll protection in flat die extrusion). Meets Spec AA-59474 Type 1, Superseding 23594C Type 1.

Class 1


Backing thickness 2 mil/0.002″
Total Thickness 3.5 mil/0.0035″
Break Strength 30 lbs/in
Adhesion 25 oz/in
Elongation 100%
Maximum Operating Temperature 500ºF
Dielectric Strength 8kV



Alternative to:

  • 3M™ 5480
  • Permacel™ P422
  • DeWal™ 204-2HD
  • St. Gobain™ 2255-2
  • Taconic™ 6445-02
  • Chemfab™ 380-02
  • Lanmar™ 585-2
  • Bondtec™ 932F